blogs

Hot Sale Trigger Sprayer Manufacturers Introducing Hand Care Pump Tips

2023-1-30

Hot Sale Trigger Sprayer Manufacturers Introduce When choosing Hand Treatment Pump , be sure to choose products produced by manufacturers of good quality. When choosing a cosmetic pump head, choose a pump head that presses smoothly and will not get stuck user at all. The cosmetic pump heads is improved. Of course, there are very cheap pump heads, but the quality of cheap pump heads is not good.

The price of the pump head is determined by the material. The price of the pump head of different materials is different, and the pump has different mouth sizes. The cost of the cosmetic bottle is the pump head. Many people do not expect it. The development of the pump head is even more difficult than the development of the bottle. Difficult, many manufacturers rarely make pump heads.

Pump heads have been stagnant in the market; cosmetic pumps cost a lot more than bottles. Pump head manufacturers can customize according to the parameters given by customers. The quality of the products of different manufacturers of cosmetic pump heads is different. We must choose the pump heads produced by reputable manufacturers, which are the most trusted products by users.

Through the above introduction,Plastic Lotion Pump Manufacturers hopes that you can simply refer to the content of this article in future use.

-------------

Non Spill Lotion Pump For Shampoo Manufacturers Introducing The Use Of Sprayers

2022-12-6
Non Spill Lotion Pump For Shampoo Manufacturers Introduces Features of Mini Trigger Sprayer:

1. Sealing function. All consumers believe that they do not want to accept products whose contents have been leaked. After the lotion pump head and the bottle are charged and packed, the sealing function is one of the important requirements of the bottled product during storage and transportation. For the parameters of the test method, such as vacuum, time, pressure, air pressure, etc., each company has different control parameters for different customer requirements, so no detailed description is given.

2. The pumping function of the emulsion pump. The feature of the lotion pump is that it can pump the same volume of material liquid for consumer use every time, so the pumping function is also one of the important requirements. The manufacturer’s intuitive way to verify this function is to turn on the lotion pump, press the head, and then press the head to the end of the journey, block the main body’s water inlet with the fingers of the other hand, and then release the head to let it bounce naturally. The skin on the surface of the finger can show the sensation of being sucked away, which is usually called "attractiveness.", You can also add emulsion, which is one of the main methods for manufacturers to determine whether the pumping function is complete.

3. Pump output. Refers to the volume of material emitted by the pump every time the consumer uses the lotion pump. After the lotion pump head is filled with filler, press the volume of the pump material from the head to the end of the movement, and press the pump to output. The pump discharge of the lotion pump head is relatively small, so always check the process consecutively and take the average value. Some companies have two elements in grams. 1. Use water as the medium during the test. 2. The fluidity of the liquid is not good, and the metering cylinder cannot be read. If the material liquid is used as the medium, the density of the material liquid must also be considered when setting the pump discharge standard.

4. Pneumatic times. It refers to the number of times the consumer opens the head and presses the head until the liquid comes out for the first time. Theoretically, after the lotion pump head is fully opened, the volume of the space from the head nozzle to the end of the suction pipe is divided by the rated pump discharge. The manufacturer will increase the insurance coefficient from 1.1 to 1.3 when setting it up. The main influencing factors are the thickness and length of the suction tube and the cumulative tolerance of each part of the lotion pump head. The volume of the shaded part of the lotion pump head/pump shipment volume=pneumatic times.

Through the above introduction, Disc Top Cap Manufacturers hopes that you can simply refer to the content of this article in future use.

-------------------------------------

Hot Sale Trigger Sprayer Manufacturers Introduce Lotion Pump Head Usage Details

2022-9-15

Hot Sale Trigger Sprayer Manufacturers introduce the knowledge of cosmetic lotion pump heads:

1. The dispenser is divided into two types: tie type and screw type. In terms of function, it is divided into spray, foundation cream, lotion pump head, aerosol valve, and vacuum bottle.

2. The size of the pump head is determined by the diameter of the bottle body. The standard spray is 12.5mm-24mm, and the water output is 0.1ml/time-0.2ml/time. It is generally used for perfume, gel water and other commodity packaging. The length of the same reception can be determined according to the height of the bottle.

3. The standard size of the lotion pump head is 16ml to 38ml, and the water output is 0.28ml/time - 3.1ml/time. It is generally used for creams and scrubs.

4. Special dispensers such as foam pump head and hand button sprinkler head. The foam pump head is a non-air-filled hand pressure pump head. It does not need to be filled to generate foam. It only needs to press lightly to generate quantitative high-quality foam. . Usually comes with a dedicated bottle. Hand button sprinklers are generally used on products such as detergents.

5. The composition of the distributor is relatively messy, generally including: dust cover, pressing head, pressing rod, gasket, piston, spring, valve, bottle cap, pump body, straw, valve ball (including steel ball, glass ball) . Bottle caps and dust caps can be colored, electroplated, or covered with anodized aluminum rings. Because a set of pump heads involves many molds, and the order quantity is large, the minimum order quantity is 10,000-20,000.

6. The vacuum bottle is generally cylindrical, the standard is 15ml-50ml, the single volume is 100ml, and the overall capacity is small. It relies on the principle of atmospheric pressure, which can prevent cosmetics from forming pollution during use. The vacuum bottle has anodized aluminum, plastic electroplating and colored For plastic, the quotation is more expensive than other ordinary containers, and the general order quantity demand is not high.

7. Distributor customers rarely open their own molds, and they need to pay more molds and the cost is higher.

Through the above introduction, Plastic Lotion Pump Manufacturers hopes that you can simply refer to the content of this article in future use.

--------------------------

Dispenser Spray Pump Manufacturers Introduce The Details Of The Use Of Pet Plastic Bottles

2022-8-17

Dispenser Spray Pump Manufacturers introduce the advantages of PET plastic bottles:

1. It has good mechanical properties, the impact strength is 3 to 5 times that of other films, and the folding resistance is good.

2. Oil resistance, fat resistance, dilute acid, dilute alkali, and most solvents.

3. It has excellent high and low temperature resistance, can be used for a long time in the temperature range of 120 °C, can withstand high temperature of 150 °C in short-term use, and can withstand low temperature of -70 °C, and has little effect on its mechanical properties at high and low temperatures.

4. The gas and water vapor permeability is low, and it has excellent gas barrier, water, oil and odor properties.

5. High transparency, can block ultraviolet rays, and have good gloss.

Dispenser Spray Pump Manufacturers Introduce The Details Of The Use Of Pet Plastic Bottles

--------------------------

2022-6-13

Dispenser Spray Pump Manufacturers introduce the advantages of PET plastic bottles:

1. It has good mechanical properties, the impact strength is 3 to 5 times that of other films, and the folding resistance is good.

2. Oil resistance, fat resistance, dilute acid, dilute alkali, and most solvents.

4. The gas and water vapor permeability is low, and it has excellent gas barrier, water, oil and odor properties.

5. High transparency, can block ultraviolet rays, and have good gloss.

-----------------------

Mini Trigger Sprayer Suppliers Introduces The Classification Strategy Of Cosmetic Packaging Materials

2022-4-28

Mini Trigger Sprayer Suppliers introduces the classification of cosmetic packaging materials

1. AS: The hardness is not high, it is brittle (there is a crisp sound when knocking), transparent color and the background color is blue, which can be directly contacted with cosmetics and food. In ordinary lotion bottles and airless bottles, it is usually the bottle body It can also be made into small-capacity cream bottles. It is transparent.

2. ABS: belongs to engineering plastics, is not environmentally friendly, with high hardness, and cannot be directly contacted with cosmetics and food. In acrylic cosmetic packaging materials, it is generally the material of the inner cover and shoulder cover. The color is yellowish or milky white.

3. PP, PE: environmentally friendly materials that can be directly contacted with cosmetics and food. They are the main materials for filling organic skincare products. The materials are whitish and translucent. According to different molecular structures, it can reach three different degrees of softness and hardness.

4. PET: It is an environmentally friendly material that can be directly contacted with cosmetics and food. It is the main material for filling organic skincare products. The PET material is soft and its natural color is transparent.

5. PCTA and PETG: environmentally friendly materials that can be directly contacted with cosmetics and food. They are the main materials for filling organic skincare products. The material is soft and transparent. PCTA and PETG are soft and easy to scratch. And it is not often used to print more pictures.

6. Acrylic: The material is hard, transparent, and the background color is whitish. In order to maintain a transparent texture, acrylic is often sprayed inside the outer bottle or painted during injection molding.

Through the above introduction, China Cosmetic Pump Manufacturers hope that you can simply refer to the content of this article for future use.